was wondering if any one can tell me how to access the wires going to the front nav light on this boat? I pulled the light apart and one of the wires has came off the base of the light. Also I saw where someone was using the nav light from academy is that a good replacement for these boats? also I'm looking for the rear pole light for this boat as well. wondering if anyone has used the led pohttp://www.academy.com/webapp/wcs/stores/servlet/Product_10151_10051_12532_-1?ICID=CRT:015080633Ple light from academy?
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
97 challenger 1800 nav light
- Thread starter texas114
- Start date
- Status
I have a 1995 speedster and my nav light was mia on my boat got another one
I got to my wires by taking the cup holder out and putting my arm in the hole and you will find those wires just pull and shake till they come out the cup holder
I then put bailing wire down the nav light hole and reach in the cup holder hole and pulled the steel wire out and tied my nav electrical wires to the bailing wire with electrical tape not to thick it wont come through the nav light hole if tape is real thick and pulled the bailing wire out from nav light hole and presto connected wire connectors, and then electrical taped them so they could never come apart.
hope this helps
I got to my wires by taking the cup holder out and putting my arm in the hole and you will find those wires just pull and shake till they come out the cup holder
I then put bailing wire down the nav light hole and reach in the cup holder hole and pulled the steel wire out and tied my nav electrical wires to the bailing wire with electrical tape not to thick it wont come through the nav light hole if tape is real thick and pulled the bailing wire out from nav light hole and presto connected wire connectors, and then electrical taped them so they could never come apart.
hope this helps
- Status
Similar threads
