96 GTi carb how to?

[gcunard]

Great resource site!

96 GTI twin carb, has the usual full throttle bogging. I have cleaned out tank, replaced hoses. (Hoses looked ok but fuel selector puked green crud and believe it is past the in line filter to carbs)

Can someone post the link(s) or direct me to the messages on how to best access the carb filters for cleaning? Can this be done on engine? Best parts to have on hand (diaphram, gaskets)? If not, source for rebuild kit as Bombardia list parts individually. Greg

 

[JPX]

Start by reading this: http://www.seadooforum.com/showthread.php?t=5563
And check all the links in there.

It is a lot easier to do all the work with the carbs OFF the boat. I've done it both ways - leaving the carbs "on" resulting in taking the PTO carb off anyway to reach that filter. I finally took them both off and I was glad I did.

Then for the rebuild kit, you can use the PARTS link above for individual parts. In my case, I used the carb kit from here - had everything I needed in one package. http://www.seadoosource.com/carbpkgs.html