951 engine stuck

[JohnK]

I let my 951 set for a month and the engine is stuck. Is that normal?
I know you're suppose to fog them but for a month? I soaked it with PB Blaster and tried a pipe wrench on the flywheel and it wouldn't budge, then I took the head off and beat on the piston with a wooden block and a hammer and it still wouldn't budge. Any suggestions?

 

[Nate Surveyor]

I suggest you talk to the folks that borry it when you are not there!



Nate

 

[JohnK]

Say what???

 

[Nate Surveyor]

When I was a kid, I had a Kawasaki KD100. It was a 2 stroke bike. It had an oil injector. My brother borrowed it, without my knowledge, and replaced the gas he used. (He rode it alot!)

I came home, and rode it. And ran it out of oil, due to his use of it, without my knowledge. Blew the motor.

What I am saying is maybe somebody else has ridden it, without your knowledge, and now you are scratching your head.

Nate

 

[JohnK]

That's impossible. It's been sitting on the trailer in front of my garage. After I used it the last time I flushed it out and turned it off. It's not an oil issue unless it seized the exact time I hit the kill switch.

 

[timmyboy76]

let it soak for day or 2...(pb-blaster)

 

[benstoys]

It is kind of a long shot. I dont see how it could be this bad. But if it infront of your garage couple it be some animal has put something up in the jet? I dont know. I am just throwing it out there. I am an engine guy and well if everything worked when you shut it down. I have a hard time beleaving after one month it would be stuck. Unless you were messing around and got some water in the engine and it rusted up some stuff. I learned the hard way jet skis like ot be on top of the water.
I don't know if this is any help. I willl keep thinking, and se if I can come up with someting else.
Ben