• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

93 GTX starting issue please help!!!!!!!

Status
Not open for further replies.

crc1racn

New Member
I just aquired a 93 GTX and I have narrowed down a problem that is occuring. When I first tried to start it the motor would turn over but would not fire, it had no spark so I took out the electrical box and figured out that if I disconnect the red and black wire that goes from the mpep to the coil it would run, but it will not shut off until i reconect the wire. So my question is what is causing this to happen. I already tried a different kill switch and thier was no change. Any help would be greatly appreciated.:rofl:
 
Hey crc1racn. If you can pull the red wire and it runs then the rectifier/regulator needs to be replaced.

Ryan
 
Status
Not open for further replies.
Back
Top