• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

92 gtx hull problem???

Status
Not open for further replies.

Fscott4

Member
It looks like the piece that goes into the hull that the boot attaches to has broken off. I see OSB has a carrier bearing repair kit (out of stock) that looks like it may have this piece included but I'm just not sure. It's been difficult to find much information on how the kit is installed or even if it is what I need. Everything forward of this is in good shape.
Any help will be greatly appreciated.
Thanks!
 

Attachments

  • IMG_1068[1].JPG
    IMG_1068[1].JPG
    280.3 KB · Views: 6
  • IMG_1067[1].JPG
    IMG_1067[1].JPG
    263.3 KB · Views: 6
Yea you need the repair kit with the metal sleeve. Should be available on Amazon and eBay too.
 
Thanks mikidymac, I did find all of the parts on ebay and amazon and was able to find some videos on the repair. The part that was confusing me was the thru the hull piece. I dont think I had to do that on the other ski and it was a little confusing to me. I picked this ski up for $350 and its in pristine condition for its age. 1 owner, New ignition box and it fires right up and runs strong. it looks like this is the only problem. I will check the pump etc when I disassemble. Thanks!
 
Status
Not open for further replies.
Back
Top