787 conterbalace seal replacement?

[eaglemach3]

hI EVERYONE I`M NEW AND WONDERING IF ANY ONE KNOWS HOW TO DISASSEMBLE THE 787 COUNTER BALANCE SHAFT SO I CAN REPLACE THE SEALS? THANKS

 

[racerxxx]

You need to remove the rear open bearing and press the gear off the shaft with a hydraulic press, replace the two seals and press the gear back on, then replace the end bearings. Oh, and it has to be in the exact same place, not any old place. If you don't have access to the press you can buy one already done from SBT for like $75. You'll have $45 to $50 in just the two bearings and probably another $10-$15 in the two seals. So for the extra $ it might be worth going that way. Please take you caps lock off, no need to yell we're all cool here.

http://www.shopsbt.com/mm5/merchant.mvc?Screen=PROD&Product_Code=22-107

 

[AircraftDoc]

hI EVERYONE I`M NEW AND WONDERING IF ANY ONE KNOWS HOW TO DISASSEMBLE THE 787 COUNTER BALANCE SHAFT SO I CAN REPLACE THE SEALS? THANKS

Once you log in, go to the seadoo 2 stroke forum and use the "Search Forum". Many times there has been a discussion already.

Welcome to seadoo forum.

 

[eaglemach3]

Thank You racerxxx