230 wake tower ?

[Boatman24]

I have an 07 230 wake. The tower dosent seem to be made to lower although everything I read says it should. If they do witch way are they made to go? All the connecting bolts look like they would be a pain to get out. Also there are wires running through the tubing, and there are no quik disconnect's. I'm planing a building to store it in and it would be nice if I could get it under a 10' door it would be real tight as is. I mesured it at around 10'3" site says 10'10". If anyone knows what's what on this I would appreceate the help.

 

[timmyboy76]

pic boatman. My guess, the "support" side bars come off, then rest of tower, lays back on sundeck/bimini top area?

 

[Boatman24]

I'm at work right now, I'll try and get some when I gat home.

 

[TVZ1965]

:cheers:It does un bolt but the speaker and light wires go thru the front bars, So if you lay it back the cable will no doult be to short. Also if you measure the distance between the back mounting location and the front one and then take that measuremnt from the back location upward I think its about the same height as is mounted? Clear as mud right. I know there are quick connects for the speakers that are inside the tower but I don't know about the lights. If this is for winter storage you can just take it off but if it storage while in use (summer time) what a pain to keep taken on and off.

 

[Boatman24]

I was thinking the samething about the hieght up and down. The seadoo site says it goes to 7'6" tower down so I don't know. I was hoping someone had gone through this already and would inlighten me.

 

[Boatking]

the side bars stay on and have caps to fill in the mounting points to keep a clean look and then you store the tower.. side bars never come off boat once installed

 

[Boatman24]

Thanks for the info guys. I just built a bigger building with higher doors so I don't have to dick with it. When I was asking I had the door height planned to be 10' I raised the building a foot so I have 11' doors now.