210 Challenger - starter button

[gb387]

Anyone replaced their starter buttons on their 210 Challengers? Mine work but I have one with a burnt out led. It's not a necessity but my OCD says it needs to match the working one. Is the only option the 110 dollar start button from BRP? Looks like a standard button (good quality one) with leads soldered on. Thoughts, anyone else ran into this?

 

[DooC180]

Check https://newwiremarine.com/

I had great luck with their printed rocker covers to replace the sticky cracked OE pieces- I even removed the packing tape with sharpie written labels that the previous owner had "custom installed" LOL

 

[go_panthers]

I'm sure it's a standard part. I had to replace the rocker switch for the bow/anchor lights. I removed the broken switch and found the manufacturer on the side. Did some research, called the manufacturer (Carling) to verify the part number, and found a supplier online - $18.26. https://www.onlinecomponents.com/carling-technologies-lt2561644012.html?p=16984833

They had a $50 minimum order, so I ordered 3 of single pole switches (https://www.onlinecomponents.com/carling-technologies-lt1511640012.html?p=17004334) so that I can add switches to the console area and have them look like factory.

I also found the dress nuts for the front of the panel (http://www.oempartsllc.com/handlesugatsunefs-102snew-6-1-1-1-1-1-1-1-1-1-1-1-1-2-4.aspx)

Somebody is making that button. The other option could be to use a Carling switch like the other ones on your dash, but a momentary version (like the horn button). It would require some testing, but if it worked, the switches would fit right in with the rest of the dash switches.

 

[devonte007]

Thanks for the tip about the rocker switch covers, just ordered up a set! Never realized you can just replace the covers.