• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2019 WakePro 230 Depth finder installation

Status
Not open for further replies.

DanielJ

New Member
Hello all!
I tried to install my new depth finder today but ran into some problems, namely not finding where the transducer shall be mounted.

So, Data first:
(I can't post any links, I am sorry, had it all nice and tidy...)
My Jet is a 2019 WakePro 230
The Kit I ordered: h t t p s://www.brppac.com/brp-295100872.html
(SKU: 295100872) My Jet is on the compatible list.
The installation instructions are here: h t t p s://instructions.brp.com/e-instruction.html#tab=1&sku=295100872
I removed everything like told in the manual but there is just not any spot that mounting bracket could get attached to. Everything sleek, no posts to install screws to be seen anywhere.
I attached 2 pics. The one is from the manual, the other is a pic of my actual jet.

My question: Has anyone installed that kit in their WakePro230? I'd love to just see a pic or get some directions.

Thanks!
 

Attachments

  • IMG_8431_1.jpg
    IMG_8431_1.jpg
    3.3 MB · Views: 41
  • IMG_8426_2.jpg
    IMG_8426_2.jpg
    2 MB · Views: 40
I have added transducers to boats and some epoxy to the bottom inside of the hull so the sound travels through the hull hits the target (bottom) and returns to the transducer calculating depth.
could it be just epoxied in place?
Just throwing it out there.
 
no one has a depth finder installed? :-(

DanielJ, I was just looking at the install instructions, are the mounting posts hidden by the muffler? It says you have to remove it to install. Maybe feel around underneath to see if they are there. I am curious because I want to install one on my 2019 GTX, but want to make sure it fits first !!
 
DanielJ, I was just looking at the install instructions, are the mounting posts hidden by the muffler? It says you have to remove it to install. Maybe feel around underneath to see if they are there. I am curious because I want to install one on my 2019 GTX, but want to make sure it fits first !!
Yes there should be a spot for the garmin fish finder
 
Status
Not open for further replies.
Back
Top