PredatorVI
Member
We had a tow rope get sucked into the impeller and my first instinct was to remove the grate to be able to cut the rope off the shaft. However, after I tried loosening the single bolt toward the bow, it now just spins but it won't come out and also won't tighten. I think it might have a nut in the bilge somewhere but I can't tell/see it right off.
Any tips on how to tighten it? It's not terribly loose, but I would feel better if it were tight.
Thanks!
Any tips on how to tighten it? It's not terribly loose, but I would feel better if it were tight.
Thanks!