• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2012 Challenger 180 SE - Start Problem - no beeps

steve.edgett

New Member
Hi All,

I have a 2012 Challenger 180 SE and today when I went to start it, no joy. Battery is charged, instrument cluster comes on, lights, blower, etc. all have power. When I push the start button nothing happens.

There is no beeping when I move from F-N-R and I think there should be beeping feedback if the neutral switch is the problem (I.e. would look like it is not in neutral).

Could a bad starter relay cause this behavior?

Anything else to check to get to the bottom of this?

Thanks,
Steve
 
In case this can help someone else, I replaced the starter relay and back in action. There are two relays in the fuse boxes. Suggest having an extra one on hand for the $20 they cost.

OMRON ELECTRONIC COMPONENTS - G8V-1C7T-R-DC12​


81kn6mHCxDL._AC_SX679_.jpg
 
Back
Top