2010 Seadoo 2010 430hp Intercooler Question

[Spyder7892]

Guys,

I have a 2010 Seadoo Challenger 210 430hp and I was wondering if there is a way to check and see if the intercooler is leaking? I have seen videos of the guys checking the externally mounted units but not much is being said about the ones that are mounted inside the intake manifold. I have been throwing some codes associated with the TB assembly and from everything I am reading this can be related to the IC leaking water (even though the IC on mine is after the TB?). I have a new TB coming but while I have it apart is there anything I can easily do to check and see if the IC is leaking? I do not see any milky oil that suggest that I have been ingesting water but I would like to check if possible before this happens.

Thanks!

 

[JPass]

I would venture to guess the best way to tell if it's leaking is to remove it and pressure test it.

 

[Premix]

remove it and pressure test it.

I would think you could pressure test it without removing it. The inlet/outlet tubing is easily accessed, too.

 

[Spyder7892]

what would be the best way to pressure test it?