2009 Sea-Doo Islandia coolant flow

[ww111]

Hi guys, Port engine is fine, hook hose up to external inlet and water flows like it should from Exhaust. Starboard engine not so much. Tried to back flow and again, nothing. Put 100 PSI of air in and again nothing. Didn't run it long enough for the light, but is there a common blockage point? trouble shooting?

Many Thanks in advance.

Collins

 

[Eclipse1701d]

admin please remove

 

[Eclipse1701d]

Not sure, but have you removed the j-pipe and checked for blockage in the holes that feed to water through the wrap around veins, to cool the exhaust, and follow the three hoses that feed it, for blockage?

 

[ww111]

admin please remove

WHY would you want what is a very legitimate question removed?

 

[ww111]

From what I can see (and the diagrams) the hose goes directly to the front of the engine and is held by a hose clamp. The hose coming off that is held by a permanent clamp. I'm not getting any flow to the 3 way connector near the back of the exhaust manifold. Like I said before I can't back feed it either.

 

[Eclipse1701d]

I didn't, I wanted my first blank post removed...

 

[ww111]

Got it. I thought I did something wrong, all good