2009 GTI SE130 - blow air into flushing connector?

[cock squared]

I am supposed to blow air into the flushing connector to get the water out of the exhaust. Where is the flushing connector? There is a picture in the operators guide that looks like it is in the engine compartment. I cannot find it. I only see the black tube coming out of the back of the SD. Is this where I inject air? Thank you very much.

UPDATE: Went to Home Depot and I did manage to fashion a makeshift hose so I can hook up a garden hose to my air compressor which will hook up to the black tube coming out of the back of my SD so I can blow air into the exhaust. I hope this is right. It's suppose to be in the 20's in South Carolina this weekend.

 

[99SK04GTX]

I have a 2004 GTX 155 NA

Your 130 is also NA ie. no supercharger and intercooler. Water in the intercooler can bust it. I have never done anything with mine for winter in VA (down in the teens and lower sometimes) other than run it dry for 15-20 seconds after the last flush of the season. I guess you could blow air into the flush port. Look at the stern of your PWC, the flush port is where you connect a garden hose to flush. It has female garden hose thread and is located adjacent to the tube that is the jet drive. I do not believe it is necessary to do but there it is.