2006 Utopia 205 SE Transducer Location

[Modmike]

My OEM Se-Doo depth sounder no longer works and I am trying to trouble shoot it. Where is the the factory transducer mounted?

 

[Crocket]

It’s under the starboard engine

 

[Modmike]

The thing is I have only one hole in the dash and it looks like someone bodge a depth finder. Did all 2006 Utopias come with a depth finder?

 

[Modmike]

By the way, I have no accessory power to Radio, Blower, and ICS. Power is dead at the switch, blower works when I give it 12 Volts at the switch.

I changed out the Twin Engine Control for a new one but no luck. Is there a fuse block in the rear for those accessories? Blower power seems like it should come from Twin Engine Control which is where I traced the Blower power wire to.

Any advice?

 

[Crocket]

 

[Modmike]

My dash is not like that one and I also have a 2006. I have one hole on the right and steering wheel is rubber.

 

[Modmike]

Are you aware of any other fuse blocks in the rear for accessory power? By the way, did you re-cover your seats?

 

[Crocket]

 

[Modmike]

Wow, nice boat. Mine doesn't look anything like that. I'm gathering the seats were never redone?

 

[Crocket]

My seats are in great shape still. I have the SE model maybe the depth finder was installed with that package. Manual does sat there are 3 20 amp main fuses and I have only found two of them

 

[Modmike]

No mention of any fuses in my manual. Where are the ones you found?

 

[Crocket]

They are behind the main power disconnect

 

[Modmike]

AHA! That may be the issue. Thanks!

 

[Crocket]

Both of my fuses were ok behind the disconnect, There must be another one that I’ve missed

 

[Modmike]

It’s under the starboard engine

Is it a through hull or in hull? If it's a through hull I don't see the brass plate so I don't have one. Is that possible?

 

[Modmike]

Both of my fuses were ok behind the disconnect, There must be another one that I’ve missed

I spoke to my mechanic and as far as he knows, there is no 3rd fuse. He works on a lot of theses and knows them inside and out. I mentioned the 3rd fuse and he said they must be referring to the gauge power fuse in each engine's ECU.

Thanks for the help by the way, I replaced one of the fuses behind the cut off switch and everything came back to life!