2004 Seadoo Islandia Wear Ring

[mac1gt]

I have a 2004 SeaDoo Islandia and need to replace the wear ring. Problem is I can't find any information as to a part number for this. I have done many searches but can't find anything. Anyone here change one of these before?

Also, is the replace processes the same as a Seadoo jetski? I have done those before, just wasn't sure if it was the same or not.

Thank you for your help.

 

[ripcuda]

The wear ring on the Mercury M2 jetpump is one solid piece. There is no removeable liner that can be replaced like the Seadoo wear rings. I've read of a company out there (mini jet boat world likes the Mercury engines/jetpumps) that can bore out the stock wear ring and insert a plastic liner similar to Seadoo... but that is costly. Another, cheaper option is to skim-coat the stock wear ring with JBweld, sand it smooth, paint it (or not). This will help take-up the gap between the wear ring and impeller.

Check out this older thread with details and pics:
How well is That M2 wear ring Jbweld Holding up??? Wear Ring suggestions

Cheers!

 

[mac1gt]

The wear ring on the Mercury M2 jetpump is one solid piece. There is no removeable liner that can be replaced like the Seadoo wear rings. I've read of a company out there (mini jet boat world likes the Mercury engines/jetpumps) that can bore out the stock wear ring and insert a plastic liner similar to Seadoo... but that is costly. Another, cheaper option is to skim-coat the stock wear ring with JBweld, sand it smooth, paint it (or not). This will help take-up the gap between the wear ring and impeller.

Check out this older thread with details and pics:
How well is That M2 wear ring Jbweld Holding up??? Wear Ring suggestions

Cheers!

I was afraid of that. I will take it a part and see what condition it is in and go from there. Thanks for posting the old thread, good info!