• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2002 gtx 4 tec

Status
Not open for further replies.

deybydey

New Member
My gauges just stopped working?
Wont' start, battery read 11.65 volts.
Any ideas greatly appreciated.

dave :cheers:
 
Charging circuit........

Dave, these things use a lot of power to operate. There is a rely that will shut everything down if your not generating the needed power to keep it running.

What you need to do is get a good charge on your battery (11.65 shows a discharged battery) then, start it up. Once it's running, put your multi-meter on the battery terminals and see what your charging system output is. You should be getting between 14 to 14.5 VDC.

Also, check all your fuses. You have a 15 amp fuse protecting your charging system, so theres a chance it's blown.........:cheers:
 
Status
Not open for further replies.
Back
Top