2000 gtx 951...whats a good head to run?

[custompartsguy]

What is a good head to run on a 951 gtx motor?

I just pulled mine off to inspect everything and found the owner lied to me about flushing it, the saltwater has pushed the head gasket down into the water jacket, then sat there and ate away at the head causing it to have already slightly leaked or very soon would have leaked into the cylinder, and where it ate away at the head was part of the head gasket seating surface, and is not worth having the head fixed vs just replacing it, so I would like to know what a good head to run would be?

Since everything I take apart I find problems I am going to tear the entire motor apart and have a look, cylinders and pistons look good and do not need honed or replaced, just improper care, and that person ripping me off....I really hope they get theirs. Karma is a butt.:reddevil:

 

[glenwhitt]

Ya Karma. I know her, and she is a #$%^&

I think R&D makes a direct replacement that will use the factory gaskets even. Not sure if they are the best but easy to work with and have a rec head that runs on pump gas.

 

[Chester]

If you can find one, get a Miller head. Buckshot and Bullet heads are also good choices as they are Miller heads under a different name.

Chester