2000 challenger m2 bouncing

[Fedexguy99]

Hello there I got 2000 challenger 1800 m2 210 bouncing a lot over 30mph
I tried adjusting but in some conditions still bounces I read adopt trim plate extender
Would anyone be able to help me out thx
Also my gear shifter vibrates a lot on take off

 

[Dr Honda]

gear shifter vibrates?? Is your bucket locking in the up position?


For the bouncing... you can adjust your trim tab down. OR... put more weight up front. There is a thread about someone making an extended tab. Just do a quick search, and I'm sure you will find it.

 

[Fedexguy99]

Yes it's is locking Couse it runs great I just have to hold on to gear shifter some tine specially
When making a turn any ideas......thx dave

 

[Dr Honda]

You can get some buffeting at full turn... full throttle... and low speed. But if it's doing it all the time... then the bucket isn't all the way up.

 

[Fedexguy99]

Yes it's basically doing all the time when bucket is up I can feel the play
It doesn't seem tight

 

[henryb]

What you need to do is remove the shifter cable connector at the bucket. Then you can move the bucket freely with your hand. You will probably notice that the bucket should go a bit higher then your cable will allow it to move.
You can now adjust your cable so that it moves the bucket all the way to the furthest up position and it should lock into place.


Sent from my iPhone using Tapatalk

 

[henryb]

Also regarding the extended ride plate... Take a look through the thread started by Aquaman1, there are pictures and dimensions, I highly recommend that you get one made... It makes the word of difference!
Since you live outside the USA, you could even get one made locally at any metal shop! Simply take yours off and go to a local machine shop, give them the dimensions, a few pictures and your old one... They can whip one up for you.


Sent from my iPhone using Tapatalk