• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2000 240 EFI will only start after moving the timing linkage multiple times.

Status
Not open for further replies.

Jmkaufman84

Active Member
My 2000 240 EFI will only start after I move the timing linkage several times. As I moved the linkage the fuel pump will breifly activate like it is priming. Once the boat starts it runs strong.

I have replaced the trigger assembly, ignition module, ECM, TPS, VST fuel pump rebuilt. I have also verified the kill switch is functioning and that I have the proper fuel pressure.
 
Lift pump should turn on with the key for a few seconds. Start checking wires and connectors backward from the pump to the round connector in bracket starboard side. Should be clean, no green wires.
 
Status
Not open for further replies.
Back
Top