• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1998 sporty 1800 717 rebuild

Status
Not open for further replies.
Hi guys, new to working on Seadoo’s, have had this sportsters for 2 years and it ran great. Finally my luck ran out . Port side was running like shit, compression test showed 130 on mag side and 100 on pto side . I pulled the engine, took cover off and pto piston is definitely not looking great, and the cover is kind of beat up. What do you guys think caused this ? And what can I do about the cover ? I was gonna Order a reman from brp. But it dose not come with the cover . Thanks guy
 

Attachments

  • 947209BB-7323-465F-BB5F-611EF60D238B.jpeg
    947209BB-7323-465F-BB5F-611EF60D238B.jpeg
    4.3 MB · Views: 6
  • EF3F4F03-ACA4-40C6-9A00-663B5A4D41F7.jpeg
    EF3F4F03-ACA4-40C6-9A00-663B5A4D41F7.jpeg
    3.7 MB · Views: 6
When was the last time the carbs and fuel system were rebuilt?
I had them done at the start of last year. When i would go to wot it would not rev past 4000, but give the choke a little put and it would fly up to full speed. .. but ya been fine ever since I got it done .
 
Status
Not open for further replies.
Back
Top