• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1998 SeaDoo XP won't start

Status
Not open for further replies.

XPMIKE

New Member
Tried starting my XP Limited for first time this season. Battery tested good. XP "beeped" when I put the kill tether on. When I hit the start button, all I got was a very, very short "bump" and then nothing - no power at all - I even tried the VTS and it didn't work unless I pulled the kill tether off and put it back on. When I do this the XP will beep but all I get when I hit the start button is a very short bump like the starter is trying and then nothing. Any help is greatly appreciated. Thanks in advance.
 
Try jumping the solenoid. Sounds like a poor ground or bad elec connection. Im guessing this wont help, meaning bad starter/bad ground/corrosion. DO you have a multimeter?
 
Thanks. I'll try jumping the solenoid. Yes, I have a multimeter. I'm leaning towards a frozen starter being I get a short "bump" when I hit the start button.
 
Status
Not open for further replies.
Back
Top