Jlutty3
Member
Hello again!
When I bought this machine, I tested and got compression in the 150-160 lbs range and saw 340 hours on the clock. I had new fuel and oil lines done, reterminated plug wires, new plugs. New sleeve on the impeller.
Trail of bread crumbs- spare spark plugs in the glove box.
It fouls plugs about every one to two hours. It starts best cold if you hold the choke out, go full throttle (with your knee) and press start.
There is also melted ice cream looking oil/ water pudding in the hull. Not much- maybe two cups total. But WTH?
I have overfilled the oil tank twice. That’s messy.
Then I find that I’m having to run about 3/4 tank of oil for every full tank of fuel.
is that normal? It does smoke but not a lot. Barely a haze behind it.
Oil pump rebuild? Carb rebuild? Where is the oil pump? Burn it? Sell it?
Any advice is appreciated.
When I bought this machine, I tested and got compression in the 150-160 lbs range and saw 340 hours on the clock. I had new fuel and oil lines done, reterminated plug wires, new plugs. New sleeve on the impeller.
Trail of bread crumbs- spare spark plugs in the glove box.
It fouls plugs about every one to two hours. It starts best cold if you hold the choke out, go full throttle (with your knee) and press start.
There is also melted ice cream looking oil/ water pudding in the hull. Not much- maybe two cups total. But WTH?
I have overfilled the oil tank twice. That’s messy.
Then I find that I’m having to run about 3/4 tank of oil for every full tank of fuel.
is that normal? It does smoke but not a lot. Barely a haze behind it.
Oil pump rebuild? Carb rebuild? Where is the oil pump? Burn it? Sell it?
Any advice is appreciated.