1997 GTX pisser relocate

[cloudmaster_321]

Hello all.

I hate the location of the OE pisser on the 97 GTX. I'd like to have it come out above the rub rail on the right side.

I see there was a DR. Honda part or something of the sort back in the day. Is there another part available that has the same hose diameter hook up? I saw in an old post to use a 2000 GTX pisser fitting. But i'm not seeing it in the parts fiche.

 

[tobytd]

Never found any for quarter inch hose. Used to make mine own out of brass hose barb fittings

 

[cloudmaster_321]

Never found any for quarter inch hose. Used to make mine own out of brass hose barb fittings

Will using one of the available 3/8" fittings work if using a hose reducer? Or will that cause a problem?

 

[tobytd]

Probably not a problem with the flow. I would think the water will slobber out of a 3/8 hole. If you stick with the quarter inch you will have a stream.

 

[tobytd]

It’s just an air vent and an indicator

 

[cloudmaster_321]

Probably not a problem with the flow. I would think the water will slobber out of a 3/8 hole. If you stick with the quarter inch you will have a stream.

I haven't found a 1/4". Are you aware of one? Can you send me a link? Thanks.

 

[cloudmaster_321]

I found one.

water bypass Water outlet 1/4 inch 90 deg PWC Jetski Seadoo wave | eBay