• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1997 Challenger Magneto/stator pin out .

Status
Not open for further replies.

riff

Premium Member
Premium Member
Can anyone tell me the pin out for the 6 pin connector going to the magneto . trying to figure out the negative magneto trigger wire . my boat has 2 black wires that connect to each other at the Ebox and then yellow/white wire for the plus side of the mag trigger .
 
You should read resistance from the yellow/white wire through one of the black wires, but not the other. The other black wire is ground for the engine frame
 

Attachments

  • 20200803_182212.jpg
    20200803_182212.jpg
    2.1 MB · Views: 7
Status
Not open for further replies.
Back
Top