1996 seadoo spx flush port

[UBSTANG]

where is the flush port to connect the hose too, I just got this ski, I believe I know where it goes but I want to be 100% sure! pics would be great, I dont know alot about this ski yet, but im learning as I go

 

[kustomkarl]

There should be a pipe type of fitting on the rear by the jet pump. It has threads in it too. Here is some information on running on the hose;

You can hook up the hose to the seadoo and have it run for up to 5 minutes. Connect the hose and start the seadoo. Turn on the water after it is started. Turn off the water, than shut down the seadoo. This way it won't allow water to back flow into the engine through the exhaust due to no back pressure from the engine not running. The bearings and seals on the impeller jet pump are cooled from being in the water. When it is on the trailer it doesn't have that cooling effect so they will get hot after about 5 minutes.
I pre start my seadoo's too, dry before I leave for the launch too. Just for a second or 2 to be sure it will start at launch. Peace of mind is worth lot.

Karl

 

[Goddo]

The 96 SPX has the 717 engine correct. Here is a pic from the manual.

 

[UBSTANG]

Thank you very much, very much appreaciated, Now I have to work on the gauges and the beeping noise. Also find out what keeps draining the battery while its not even running.. where is the fuses on this ski ?

thanks guys.