1995 sportster exhaust gasket question

[InDebtJet]

Hey everyone,

Had the pipe off to fix the freeze out plugs, i have found the gasket back to the manifold, but i cannot find where to get a new seal for the side that gets clamped ? Hopefully that is descriptive enough! Any help is appreciated!

Thanks kyle

 

[FinnExplorer]

Did you already try the sites own shop, from the home page, seadoowarehouse?

 

[racerxxx]

I'm assuming your talking about #35? It's a copper seal, just use some Orange Hi-Temp Silicone RTV. I use Permatex 101BR. Scrape all the old stuff of with a straight blade.

http://partsfinder.onlinemicrofiche...jb&a=192&b=2&c=0&d=-ENGINE-SUPPORT-W/-MUFFLER

 

[InDebtJet]

I sure did check seadoowarehouse! First place I looked. Yes #35 is what i am referring too, and it appears that what is there is some rtv, but i wanted to be sure and get a gasket if I could. I will scrape and use the orange RTV. Thanks for the response!

 

[racerxxx]

Nope, just make sure the copper gasket is there and use the RTV and you should be good to go.

 

[brian lewis087]

try getting in touch with 99spxxx pm him i'm sure he can help you out