1994 gts

[Paul gts]

I have a pair of 1994 seadoo gts. One of them has the handlebar shutoff button wires clipped , stripped and twisted together after the connecter plug. They cut the wires from the original switch 2 inches before the plug connector. Looks like they installed a new off switch because it's black and not red like my other ski. The lanyard switch works fine but it won't start unless I have those wires twisted together. I untwisted the wires and touched the wires from the new switch to the cut wires and it wouldn't start. It would only start if I twisted the wires back together. Any help would be greatly appreciated. My first time on this forum, thank you

 

[mikidymac]

Get the correct switch. And the old ones are opposite the newer ones as ones normally open and ones normal closed and aren’t interchangeable.

 

[Paul gts]

I never thought about that. Your right, the last owner probably bought the wrong switch. I will check that out . Thanks