1992 SeaDoo GTS no spark

[Bill_proctor]

I bought this Seadoo and started rebuilding it. I have replaced all of the fuel lines, starter solenoid, Stator, MPEM & Coil. It turns over well but I get no spark. I have gone thru the wiring diagram and I believe all of the wires are connected properly. When I pull the kill switch cord off the start button doesn't work so I'm thinking that the kill switch is good. I'm at a loss on what to check now. All replies are appreciated.

 

[POPPS]

try jumping the start button,,see if that works,,,did you replace the "cdi"...if that is gone,,,you will get no spark.