• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

12V Socket with no voltage

Status
Not open for further replies.

Striker4Hire

New Member
Hey guys,
I have a 2001 Challenger 2000. CD player in the passenger glovebox is working okay (in spite of the hack install job that was done before I bought it). 12V socket is dead. Wires for both the socket and the CD player run through the same piece of conduit back into the engine compartment to a series of little hanging fuze boxes (at least that's where I think they go) just before the main switch. Are those lines fuzed separately? Any way to identify them without ripping them apart one by one?

Any other thoughts if not the fuze?

Thanks,

Jeremy
 
As I read down the list further I see SeadooDude1 had a similar issue and the fuze was under the driver's side bucket on his Challenger. I'll go take a look.
 
Yep, there they are. Two fuzes for the 12V socket. Card says they are both supposed to be 10A, however there is a 20A fuze in the top one. Both appear to be intact. I'll start checking out the fuze box later in the week.

Any yes, I find writing to myself to be very therapeutic...
 
Status
Not open for further replies.
Back
Top