• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

02 GTX-di pulling to the right

Status
Not open for further replies.

TrebeccaQ

New Member
First I'd like to say hello to everyone because i'm new here and to the jet ski scene. I just bought a pair of SeaDoo's last week (04 RXP / 02 GTX-di). They both run great except for 1 minor issue i'm having, when i'm driving the DI, straight at wide open throttle, it keeps pulling to the right like it wants to turn. It's not a major problem, but it's got me curious as to if I can tweak something like the steering cable etc...to kinda "align" it. Thanks for the info.
 
Take that thang to a front end shop, before you ware out the frunt tars!

(Sorry, I'm new here, but the advice was free!)

I don't know.

Maybe a broken spline in the water path, somewhere between where the water enters the craft, goes through the impellor, and exits. There are channels that it is supposed to go through and if there was a wad of gum in the right place.... or a broken spline...

I'm only giving a 5th grade educated guess, but I'd do a thorough inspection of the water path.

Nate

PS, maybe a mermaid hanging off the right side....

:)
 
Last edited by a moderator:
Maybe you have one arm longer than the other LoL.

Check the sponsons at the rear of the hull.
If there adjusted to differing hieghts they'll make you turn.
If its not that then check your stearing cable for adjustment and line it up.
Two man job, keeping the stearing straight and adjusting at the rear.
 
Thanks, I appreciate all the help...i'll have to take a look at those....hopefully an easy fix...thanks again .
 
Status
Not open for further replies.
Back
Top