Search results

Engine seized in my 1997 Gs. Need new engine or rebuild kit. I'd anytime has please let me know.

Turned out to be a loose wire in the mpem. Now engine is seized.

I had the key in and jumped it and got nothing.

OK I have them apart

So insert two temporary wires into the connectors ?

OK so I just need to expose a little copper on the yellow and black wires then?

So hard wire them together? Can I remove the wires without having to use the soldering iron?

i replaced the solenoid with a brand new one, I am having the same issue. Would you have another Idea? Thanks either way.

i replaced the solenoid with a brand new one, I am having the same issue. Would you have another Idea? Thanks either way.

What terminal are you speaking of under the handle bars? There is nothing under the handles besides wires and the steering mechanism.

Under the handles? Jump with my car or jump charger? What do I look for under the handles ?

12.38 volts by doing this. I out meter op n the actual wires of the start button and got 10.51

I've got the multi meter but where do I out the red and black?

I have a 1997 seadoo gs and the ignition button on the handle will not engage the starter. If I take the starter solenoid out and cross the posts, then I can start the beast. Does this mean bad solenoid? I checked and the 15 amp fuse is good in the box. Thanks for any help

I have voltage at the switch with the above guidelines given, any other ideas?

My sea doo gs won't turn over. The case for the solenoid was full of water after a storm and I replaced everything in it. I can only get the engine to turn over by crossing the posts of the solenoid relay but won't fully start. Any ideas?