Search results

Try Nick Carnes at Westside Powersports at 612-743-9311. I found him earlier this summer when I needed one. Good luck.

Also, make sure the shift is in neutral.

Since you are dealing with a direct drive, check for obstacles in the drive line. Check for weeds in the intake and see if axel will turn over the engine. Good luck.

I rebuilt the same model last year, and did not have a problem. I had carbs so there weren't any issues with the direct injection (DI) system. The engine is a two stroke with fewer parts and a lot easier to work on than the newer four stroke engines. They are a solid platform for first time...

Try Westside Powersports in Wayzata, MN. Give Nic a call at 612-743-9311.

Pressure from some place - check cylinders for pressure.

the seat upholstery can be replaced by drilling out the heads of the pop rivets. there were six per seat on mine. seat covers are available online or take to shops. the new rivet anchors and washers must inserted during recover process. also note that the fabric material must conform to the...

The one listed is for the boat is 267000084, but the pump on the boat is 267000046. The listed one has parts available, but the 046 one is a dead in?

I am looking for one too. Can't find a diagram of the parts either.

Would you consider $75 to include shipping if it marked as a 135 radius? Thanks. Ron

Found the steering gear broken inside. Someone really forced the wheel to turn and broke the secondary (short vertical) shaft. Of course the steering cable was rusted together inside so the cable wasn't going to move. Now need source for new gear?

Hey, Thanks a million. Had it off but didn't see or feel it when I first tried. After your post, I found it. You are right about the windshield so it came off as well. Thanks a million. ps... Appears steering gear is bad inside as wheel turns but cable doesn't turn. Ron

Found some subs at home depot with Phillips flat head ss 6-1 mm x 60mm -Everbuilt machine screw, part number 757545 for around $1.75 each.

Which panels need to be removed at the helm to access the steering cable connection and steering gear. And, how do you remove the panels: 1) Inside the gauges compartment to access the Console cap? and, or 2) Remove the panel below the steering wheel? Can't figure which way to push or pull the...

I went with the pop rivets. They are large head flat black 3/16" diameter by 3/4" grip. I found them at "brykeracing.com. They are about $4 per box of 50 and they have about any color. Shipping is like $4 per pound (2 each 50 unit packs are under a pound). Good luck.

Answered my own question when I when I drilled out the pop rivets - either would probably work. The rivets or darts secure to hard plastic portion of seat cushions.

Manual shows 3/16 pop rivets but current part number is for plastic darts. Are these interchangeable? What would be the least expensive source for the darts if they are the best to use. Thanks in advance. Ron

Hey, Thanks, my bad as I didn't notice the difference. Thanks again. Ron