Search results

Good Information for reference: My Lanyard switch cover rotted through last weekend, would have had to hold the switch in for the long ride back. Here's some good info that I found, may help someone some day. The switch is closed (allows current) when NOT engaged, at rest, no lanyard. The...

Intermittent starting. Runs great when it does start. When no start, verified no spark. Crank position sensor reads 1 MEGOHM. Believe it should be about 300 OHMS. Does anyone have the real value. Thanks!

I cannot find this part number for the life of me, even called Merc Dealer. Need to know the part number of the fuel lift pump. Would also like to know the pressure I should see on direct read gauge while running (3-5 sec after ignition on switch) and residual pressure. It would be nice...

Passing on some good information, hope this helps someone sometime. During a start & stop fishing day, all of a sudden the engine wouldn't start. Cranked, no start. Checked lanyard, good (no beep when switching to on with lanyard pulled). noticed that the normal start sequence was off...

I know this is not good, but I suppose I am looking to understand how bad it is. I have been hearing a "ticking" or tapping, particularly at idle/low rpm. Thought maybe an exhaust leak or FOD in the impeller - the noise went with rpm. Pulled the boat & without the lanyard, turned the...

2003 Utopia - I had to replace my bilge pump. The design has changed and I had to replace the base as well. The old base is riveted in, so I drilled the head and removed them easily enough. The new one is installed with metal screws (and pilot holes). Now I question myself since this area...

I hope this inspires someone to create a molded plastic contraption-we could patent it and make hundreds! Last season I bogged down with weeds on a cold morning. I managed to use this extendable pole and my brush attachment to free myself. I present to you, my de-weeder. I took a paint...

Trying to remove ride plate for installation of a place diverter trim kit - stripped out the star scews (A) in the pic. I tried drilling & wound up grinding the heads off. Still havent gotten the (B) screws out yet either. Planning on trying heat & impact screwgun. I soaked them for 2+ weeks...

Found some great tips & advice while surfing through the forum & wanted to share. My first post, I will attempt to include original links & some photos. First, my speedo didn’t work. Found some troubleshooting tips which led me to buy a new paddlewheel assy. That didn't work so I got a new...