Search results

Thanks for the offer. I received the used one today and the bleed screw was perfect. It has a very thin sealing washer which seals small channels on the sides of the screw hole. Included are some pictures with measurements of the screw for future searchers.

Thanks but that comes up as a plug for the Impeller Cover in the Pump assembly. I had my hopes up for a second. 2004 Sea-Doo GTI LE RFI Pump | Sea-Doo Warehouse Thanks for trying. I went ahead and bought a used oil pump so I could scavenge the Bleed Screw. I guess I'll have a spare Oil Pump...

No one knows the details of the bleed screw? Size/length? Pretty sure it is a M4 but don't know the length, I don't want one too long that blocks the flow of oil.

Thanks for the reply. I had it out and was bleeding it and it looked like a regular screw/washer except for the long hexagonal head. I have a regular M4 with a washer which is working but it may not be the right length. I don't want to block the port behind the opening. If you could measure the...

My bleed screw on a 2004 GTI LE RFI broke off. It looks like a M4 but what is the length? Also, is it a standard sealing type washer? Copper? The broken screw and washer fell into the bowels of the boat. Help!

Thanks!

I think what you are saying that it's obvious a 8mm line wouldn't fit on a 12mm nipple and the 12mm hose would be too big for the 8mm nipple on the oil pump. Right?

So the 2003 diagram is correct?

I am replacing the Oil Tank and decided to replace the oil filter. I was looking at the Oil System diagram for my 2004 GTI LE RFI and noticed the 8mm line with filter is going to the engine behind the starter and the larger 12mm hose is going to the oil pump. My oil filter was installed on the...

Okay, I'll reapply the silicone. I guess I'll try a bolt extractor first. Then if that doesn't work...just drill it out? Also, when looking up into the grate, I noticed the driveshaft has some surface rust...normal?

Perfect...thanks for the confirmation. Didn't want to toss it if important.

It looks like with eyeball measuring it could be the M8 bolts that go into the rear of the Riding plate. Although I don't think the plate is as wide as the location of the holes on the inside. I'll have to tape measure it later to be sure. I also noticed one of the bolt heads is snapped off the...

Another mystery blob of silicone sealant on the small humps just aft of the screen bailers. The port side pulled off and revealed a small hole in the body. The right side is still in its place. I attached 2 pictures, the port side with the hole exposed and the starboard side with the sealant...

I am a new owner of a 2004 GTI LE RFI and have been doing some cleaning. In the front I found a yellow plastic screw with 2 rubber washers on it. It looks like it could be off an old battery vent plug but the current battery is an AGM. It is about 1/2 inch long. Want to make sure it's not...

It this still for sale?

Email Sent.