Search results

i have some 717 motors and one has two issues first issue is the coupler crank seal leaks. i figure spin motor remove bottom crank case change seals on each end and put back together . is there anything to mess up my plan that makes it necessary to remove cylinders ?? and before i take it apart...

1)after leaking carbon seal change i found the bellows for lack of words shrunk , problem less tension on carbon seal. 2) the stainless suffered from rusting it pitted holding salt water hence spraying salt into entire hull (small droplets ) WOULD CARBON SEAL GET RUINED IF I LUBE IT WITH GREASE...

i need NGK DCPR8E solid post ,spark plus x3 for my 2018 seadoo gti se 130 i look on ebay and find a whole bunch of differences , never thought id have a hard time buying the right plug lol i see ngk 4339 , nickel , screw tip , standard , copper core nickel, some plugs have the R which i believe...

looking to use a bellows from a higher hp do to two seal changes and still a mist water leak from carbon seal. dealer said the engine alenment good lol im waiting for tools to do alignment myself. but the question is the same if anyone would know are the shaft diameters the same from from a gti...

AS TITLE STATED HERES THE PICTURES. WHY DID IT LEAK NOTHING WRONG. THE CARBON SEAL IS WEARING IN THE CENTER NOT ALL OVER THE PLACE THE STAINLESS PART ISNT ALL OVER THE PLACE . I DONT SEE ANY SHIMS UNDER MOUNTS . WELL THE STAINLESS PART IS NOW PITED WHY ?WHEN IN SKI YOU CAN SEE RUST COMING OUT...

id like to install a second electric bilge pump into my 2018 gti se 130 . and also a second battery. is there any bracket from an old ski ( i do have a complete 97 gti with all parts as spares) etc or a new expensive kit lol to safely mount a secound battery ? Id like to see some pictures or...

is there a better carbon seal set then what was installed at factory? (my ski is a 2018 gti se 130 6 months out the dealership ldoor) mine dont have much tension which is causing a small leak , basically a salt maker . the more i look into this the more i see people have leaking seal with their...

if so id like to know if you like it ? and what do you get out of it? its advertised as lap timer fuel time and distance to empty average and top speed rpm display engine temp do the engine temp and rpm and speed all shown at same time with out havin to go thru display ? which is a pain. does...

question i have a 2018 gti 130, does anyones ski have a carbon seal as new as mine that leaks after a few hours of run time( like a fine spray) i figured the carbon seal was leaking i called dealer and they told me carbon seals are dry so they dont leak so i said okay and found that my bilge...

has anyone noticed that there 2018 gti 130 ,(or and all seadoo models) when in reverse or brake sprays water inside the engine compartment .and the engine has to be at a higher rpm! like parking or backing up fast to advoid hitting something ?? the two elbows at the top of the bilge system has...

the deal is 4 year warranty for this 2018 leftover and from boat show sale back in December . what do they give as proof that I have a 4 year warranty ?

thinking about buying a ski with a 717 motor apart with a new crank and pistons in boxes. the guy said like 10 years ago he bought this stuff it was told to him its a stroker crank for the 717 motor only numbers found for crank is on box 887212. does this number exist as a real part etc etc.

I changed all fuell lines bypassed selector blocked off one supply port . left the vent as factory contions I check the check valves etc I used after market filters I put two in line before carbs this is a twin carb 717 motor . motor only runs good with the choke plate half closed and it has...

does the arm on the oil pump return on its own with the power of the spring or does the motor have to be running ? I bought a gti 1996 with the 717 motor and noticed that the oil pump arm didn't return to the almost closed position or the idle position (I seen the cable was also stuck like...

I picked up a 1996 gti with a 717 engine I bought it knowing it needs work I new seller was having issues I found one he didn't tell me about . so I know he wasn't honest. upon looking around and removing the carb box I found metal filings . so I know I got problems . but at 700 for ski and...