Search results

???

thanks but, none of that makes any sense to me..... how do I use that to determine the stock pitch? there's no #'s just a paper with lines on it. lol

what's the stock impeller pitch on the spark ACE 900? I can'st seem to find info anywhere.

really? so I just wasted $280 on a shiny new 12/17 solas? :(

just fyi- just about every DG setup will cut out over 10 mph regardless where you mount the xducer. I've probably installed well over a dozen of'em on all kinds of boats- through hull & transom mounted- the deeper the xducer sits in the water away from the transom (jet or prop), the better they...

i have no problems with stability at all on my 2up & 3up trixx- I'm about 5'10" @ 180lbs. But I do notice my friend who is same height but at least 260 - 280 lbs tips it almost every time he rides it.

same thing happened to me last week- pulled the ski out because of performance issues; ski kept porpoising no matter where the VTS was set to - checked the pump and 2 of the 3 pump bolts were missing and the 3rd bolt was lose! the whole pump was flopping around. the impeller & shaft look good...

I've flipped my trixx at least 6 or 7 times. every time I get it right side up and let it sit for a few minutes- then start it and monitor it for another few minutes. have never had an issue.

i cant find the answer anywhere on line or in here...

so, I pulled my 2018 spark trixx out to inspect the bucket- ski kept porpoising regardless of VTS position- i thought the bucket was damaged- nope, 2 of the 3 pump bolts are missing! entire pump is flopping around! ski is bone stock and only has 24 hours on it!!! video & pics below :oops::mad:

older thread but wanted to weigh in... I also have a cruising style seadoo rxt 260 is- crazy amount of power and very comfortable to ride- but I do get bored on it and a tank of gas only lasts a day at most, not even if you're pulling a tube with the kids in it. I also grew up with motocross-...

wow- that's crazy high. I have a full coverage policy with geico (theft, collision, medical & property damage, repairs over $300 and cash value based on condition of hull) 12 months cost me $312. ever since my 2011 RXT iS 260 super charger wiped out my engine and I was looking at $4k in repair...

it's one of the worst features on the trixx- (not the rising bars, just the clamp) I have 2 trixx and I was very disappointed to see this lousy clamp still being used on the current 2020 trixx. it truly is a horrible design. it's works well for a month- but then gets increasingly difficult to...

yep-pull that pump off. replace the ring and fix the impeller. it's actually not that bad of a job to do and the rings are cheap- maybe $75 on ebay. any outboard shop should be able to fix the impeller. once the nozzle is off, you'll be able to remove the cone and use an allen wrench to rotate...

jesus- the entire ring was gone? what on earth did you suck up? lol hope the rest of the pump made it through okay. must've been a hell of ride back to the dock!

lol wow! Then you're definitely not someone who should be using a stainless steel wear ring! I live on a big lake where it's easy to remain away from any debris, other than a couple of lily pads around some coves. In the last six years the only thing I sucked up was my tubing rope

I was just looking into adding a trixx ramp kit to a 2018 spark (conversion) looks like in 2018 & newer, the ramp kit isn't needed, just plug & play IBR / VTS modules but in the 2017 & later models, there was quite a modification involved with the pump. I think it has to do with the IBR pumps vs...

sand will take a delrin ring down quickly- maybe he has a sandy dock area?

funny- I just had a guy come look at my gtx to buy it- it's in amazing condition- really well taken care of with a completely rebuilt pump, sc and new gel battery. he was trying real hard to get me to move on my price. we pulled it out of the water after the test drive and the hull had dried...

I put one in my gtx 215 along with a new solas impeller. if I didn't have a hydraulic press, I never would've been able to get it in- even with freezing the ring and warming the pump. it was soooo tight! but, runs awesome. I never beach my water toys and always pay attention to what my draft is...