Search results

I picked up a used boat cradle that currently has 2x6 flat bunks. My plan is to shorten up the existing swivel brackets to fit a 2x4 bunk instead. On center I am at 20 1/2 inches. Do you think that will work for a RXTX 325? OR should I keep with the 2x6 wide bunks? My other option is to remove...

I picked up a project ski where someone decided to remove EVERYTHING to clean and restore it. Then they forgot what went where and gave up LOL. In doing so, they removed the VTS motor and assembly and lost most of the parts. This is the style where you turn the gas cap looking piece to adjust...

I am working on a 98 gsx limited. The owner didnt secure the battery and it shorted out melting the posts and apparently killed the starter as well. He replaced the starter solenoid hoping that was the issue but no luck. He didnt want to mess with it so I took on the job, dropped the carbs...

I need some Macgyver ideas to fix two issues that I have ran across on this gsx limited that I am working on. One is the airbox is missing the metal tab so the clip on the carb wont latch. Does anyone have a extra tab from a box they removed? The second is the top set screw that holds the...

So I came across this 95 XP 800, no title for $200. Is it worth a restore or should I keep looking? IT is the no title that is going to be a pita to fix.

I acquired a 94 GTX that was told it doesnt run or turn over. I got it home and popped in a new battery and nothing. Jumped the solenoid and it turns over with even 155 compression. I did some digging with the wires and found the 5 amp fuse blown on the mpem. Replaced it and nothing. I then got...

I knew this was bad when I removed the pump cone and found black tar looking stuff and no oil. If there is any way to salvage this thing, I need the impeller removed. However with the normal 1/2 breaker bar and even a cheater pipe, all I can get is maybe half a turn and then it freezes. Any...

I have a crap ton of gaskets, springs and arms from rebuilding many sea doo carbs. The left and center gaskets ( in pic) are not found on a sea doo carb but probably a lot of others. Maybe if someone has a shop, they can use these. Free !!!!!!

I am working on a 96 GTX that had a trashed motor. I got a replacement and cleaned up everything. I went to check for spark before starting to button everything down and at the time I didnt see anything. Later in the evening I checked again and the spark is very faint, orange in color. On...

I am needing just the clear lens from a busted gauge from a 96-99 gsx, gtx or anything that is the same size gauge. I will take a complete bad, non working gauge and take it a part myself or if you already have one a part, I will just take the lens. I recently did the lcd lens replacement and...

I recently acquired a motorized winch and was wondering if I can lift a complete engine out of a 1996 GTX without removing the pipe and carbs? Is it possible?

Am I going crazy or is something off? I swore this fuel fitting on this cover has a restrictor in it but I am able to spray carb cleaner through way too easily. Thoughts?

I need the set screw for the choke cable on a 94 SP. Does anyone know what size it is and what pitch the threads are?

1997 gtx with perfect 150 compression. Changed fuel lines, oil lines, cleaned fuel filter, new fuel selector valve, rebuilt carbs with oem kits and set carbs to oem spec. Pop off dead on to oem spec. Here is the issue, it idled great in the water, rpms are steady. When you give it gas it takes...

First time pulling a motor on a XP with a 951 engine. The lower clear hose that is located at the lower portion on the engine ( circled in red ) was attached to the motor but the other end was just in the hull. Where does this connect to exit the ski? If anyone has a pic that would be great.

Instead of going with the factory 500 pump I have (2) 800 automatic pumps I am putting in. One will be towards the back behind the intercooler and the other will be where a aftermarket depth finder would go near the IBR and waterbox. I am second guessing this location if I ever want a depth...

Just thought I would share some pics of the recent install of the Riva rear exhaust and waterbox. The sound is amazing and the space it frees up is great too. The only thing I did not like in this kit was the rubber gasket is too soft. When you tighten the outlet tip, the gasket squishes out...

I am looking for the best, cost effective lift for my new 300 for the dock. It will just be used to keep the ski out of the water for the weekends as I will be trailing it home when I am not there. The only lift I do not want is the side mount lift that you hand crank to lift it up. Has anyone...

If anyone is looking for something different but matches your ski, check out this place. Their customer service is on point and answered all my questions before I ordered :thumbsup: http://shop.domednumbers.com/products/sea-doo-1

I am familiar with the steps for winterizing a 2 stroke but have not done this on my new 300 and have a few questions ...... *When blowing air through the left flush port does the engine have to be running? ( the manual doesnt say yes or no ) *There is also a port on the right but the shop...