Search results

Exactly what it says! I used it once and I still have the box it came in. https://www.shopsbt.com/jetski/sea-doo-alignment-tool-xp-gt-gtx-xp-spx-explorer.html $140 plus shipping OBO. Shipping process totally negotiable since I know it's a pain. The box is 6x12x58 and 23 lbs.

Changing Jet Pump Oil There is an existing howto for this, but it has some unnecessary steps/missing some details, and maybe people don't want to download attachments (or are trying to view on their phone or whatever) so I thought I would write a new one while I was at it with a little better...

On the oil tank filler necks of my two RX DIs there is a small semi-circular plastic piece that has a tiny piece of hose and a little check valve that clips into the bottom edge of the filler neck. Picture from the bottom: Connected to the neck are two lines, one that goes to the bottom of...

Hey I thought this might be helpful after I collated all this information, mostly from posts by jhjesse, thank you! I have been working on my '02 RX DI and while I'm taking basically everything apart I have been trying to do some stuff that has been neglected during the previous ~150 hours...

Hey everyone. I posted about this problem quite awhile ago but I couldn't resurrect that thread so here we go again. Original thread: RAVE valves - damaged valve and piston, water in oil? I haven't ridden them much since then but decided to get to the bottom of this. I knew it was already in...

Hey, I was cleaning my RAVE valves for the first time ever on this ski (02 RXDI) and I found this (click for larger): Pics taken from starboard side. These three are from the MAG cylinder: These three are from the rear (PTO) cylinder: How about that damaged valve and the damage to...

Just what it says! Can't seem to find one anywhere. :( Seems like they mostly get broken when people try to get them off. Help please! :)

Hey guys. I am in the process of getting the pump support off my ski and have come down to the connector for the speed sensor. I'm trying to avoid having to cut and splice the wires later. I read this in the manual: Obviously I don't have Snap-on tool TT600-4. :) I do have a regular...

I think I have the mechanical fixes figured out but wanted to see if anyone had any ideas on patching/repairing these holes in the intake area. I think I can take the ride plate off and access the damaged area from behind. Ideas? :)

Howdy! Since I've owned this 03 RX DI, it's always made kind of a nasty rattling sound on the trailer, and a slightly less nasty rattling sound in the water (at idle) as soon as you get a couple hundred RPM over idle it goes away. I have an 02 that does not suffer the same problem. Not sure if...

I ended up with 17 of these I bought on eBay while repairing the strap on my seat. I know they're pretty cheap anyway but if anybody needs a couple shoot me a PM and I can send you some since I have extras!

I know there's a number of these threads already but more information/pictures is always better! Anyway, I got a Hydroturf seat cover for my RX and got around to installing it now that the weather is warming up a bit. I didn't take any "during" photos but they probably wouldn't be very...

I'm relatively sure that's what this stuff is. Previous owner left them outside all the time so a lot of water and junk collected in the footwells and under the old mats. The stuff left behind is really hard and rough, and I can't get it off to save my life. In the footwell Along the left...

So the seat on one of my new (to me) skis is pretty beat up: I took it to a place today and was quoted $200 to fix up the foam and recover it (single color). The other seat isn't too bad: I am wondering if I should just stick with what I get from him, or if I should have him just fix...

I'm almost positive this has to have been answered before but I struck out with searching. I'm wondering what exactly the point of these are: The parts manual describes them as VENT HOSE: Here's where it looks like they go in the rear: And in the front... Anyway, I...

This is not particularly exciting but I thought I'd post it up just for future reference in case someone is searching for this sort of thing. Not a hard procedure but pictures are always good for real newbies (like me) so maybe it will help someone 5 years from now. :) While I figure out what...

I recently picked up two skis (my first) that are in sound mechanical condition but look a little rough on the outside: Anyway, I bought some stuff: http://www.harborfreight.com/sanderpolisher-7-variable-speed-69474.html (was only $30) This had pretty good reviews too...

Hey everyone, I am having some trouble thoroughly stripping off the old registration numbers from a couple of skis I just got. I managed to peel off all the sticker part with a razor blade (worked well). This left a good amount of sticky residue which I got off alternating between mineral...

I was wondering if anyone has any recommendations on a trailer coupler lock. Looks like there's a few different styles: http://amzn.com/B000OC3Q2I http://amzn.com/B0007M3FJO http://amzn.com/B000L9QRE8 Just thought I'd see if anyone has strong feelings or experience with any...