Search results

Hi Burt Let me see if I have wired my fuel pipes correctly lol As per below the red dot goes to RES on baffle. Blue goes directly to the fuel filter showing the arrow in the other arrow showing out goes to the carb that has a arrow showing in. The yellow goes to ON the baffle The is a...

Hi Burt To be safe I bypassed my tank fuel connected to the inlet nipple a bottle with fuel on a clear hose. I started it up and could see fuel moving in the line, however it ran for about 5 seconds and died , I manged to start it up several times same thing. Now I am confused I think I have...

Thanks not keen to open her up again lol

Cheers I hope it's something like that and not the inner seals ,I mean I looked at them they where brand new and I even put a touch of gasket seal I used on cassing I am finding it hard to belive its leaking

I see your point ,will order one . I don't know what fuel lines they are, from what I can see they look proper thick rubber. I recall the owner saying he replaced the lines , they definitely not the original grey ones. To be honest I would not be surprised if he replaced the valve

I see I did not touch any of that , I can say that the 2 pipes that go into the carb if I blow on them I can hear air going into the gas tank and also if I suck on it fuel comes out. I think your suggestion a small tank with direct feed into carb will tell if fuel is not flowing correctly from...

I can confirm when I cleaned it out when I sprayed carb cleaner out the main ports I saw build come our easily out those holes you referring too. See attached all the red dots is parts I replaced when I did the carb rebuild What is the selector valve?

Hi Burt Confident in the mikuni carb rebuild kit this was one of my first lessons lol Pop off , hold of psi all checked and correct too . I will need to check if I can see ot hear fuel coming out the tiny holes in carb. However what I normally do on a first start in awhile is poor a little...

Hi All Sorry been quite about this , whilst this was happing my starter packed up , ordered a one ,however I was going overseas on holiday. I got back 2 weeks back fitted my new starter ,only for the electrical main harness plug to play up lol.( I recently put a thread on here about this)...

I appreciate that ,really do!!! I take it it's for the same ski? So the only question now is getting it from the US to NZ? Will you post it and I can just pay you the courier costs ? Easiest way if you have a PayPal account or western union transfer Thanks

Hi Etemplet Ah really it's a seadoo gti 2002 , it's a universal plug alot of them use the same plug

Hi All As per picture I am battling to find someone who sells no 19 and 21 , mine is damaged and not making proper connection . Anyone know where to buy or what they did to fix ,see there is a similar thread about this Part no's are its the plug and pins for a seadoo wiring harness into the...

Hey Burtshaver No I have not lol ,would of tired it this week end. @ Mikidymac thanks,hopefully I was been paranoid I will try find a shallow river to do this test I don't want to get stuck out there ,it happen when I broke it the first time lol

Yeah referring to drive ,neutral or reverse, so neutral it is

Did not think of that lol , must it be in natural? Or in gear. Thanks

Hey No I have not out it in waree yet , wanted to run it on tap for a couple of days make sure it runs for at least 2 min a time without dying . Last thing I want is for it to die whilst out on a river lol I will try find a place that's shallow for testing purposes. I wanted to ask you...

So I replaced the gasket ,the water coming out the manifold has stopped so good news on that. Not to sure about the oil though it ran for about a min smoked alot and then cut out , I pulled the plugs not sure if they fouling because oil is coming up the chamber Or it's because I am using the...

Hi Etemplet So to be honest a couple of mistakes I did , that's actually the old gasket , I did not realize i never took it off , I had another one on top of that one ,that might be why it leaked,see attached the one I actually bought. I may have put to much oil in the cylinder chambers, I...

Hi All Some of you may be aware I have been rebuilding my ski, last issue I had was compression,sorted that out not so long ago with new rings. I finally put everything back together,after a few turns of the button my seadoo gti 2002 717 started was running nicely for a a few times for about...

Cheers I have the same stuff I did it like that ,but after watching some u tube videos I see some guys put it on the seals ,so just checking. I have my motor opened as replacing my rings ,so now is a good time to do it if I need to do it.