Search results

Thanks for your help

I have a original seadoo 4 stroke head Is there any way to identify what year and model of seadoo jet ski it came off I was told they change the head design after 2007 is this correct Thanks

Hi I would take ski-d00 advice I have been rebuilding a 4 - Tec 260hp motor including a rebore and ski-doo has given me heaps of advice when I needed it. I have found that his advice has been stop on every time. As for the SC washer I have seen the aftermath of what fine bits of ceramic washer...

I put a new bearing kit into my jet pump GTX 260 IS LTD 2015 ski after pressing the new bearing and seals into the pump the shaft turns as normal I put the prop onto the shaft and everything turns fine until I tighten the prop up then the prop just locks up and will not turn If I loosen the prop...

Can a Candoo Pro re-flash a ECU, I need a ECU for my GTX 260 IS LTD 2015 I have seen a couple of well priced ECUs but have been told I would need to re-flash the ECU before it would work with my ski I was thinking if I bought a Candoo then I could re-flash a ECU

I did my first engine alignment a week ago I found it very easy just follow the service manual but you do need the tool

Hi I am doing up a late model ski at the moment a GTX 260 IS LTD 2015, I have just finished rebuilding the motor and have put it in the ski. One thing I did not realizes until I started how expensive parts are in Australia for jet ski. prices are over the top in AU, and to import from US is no...

I have just rebuilt with a lot of advise from ski-d00, choose to re-bore my motor, although I may have gotten away with just a hone but I had one cylinder that had a little rust damage I put new piston, rings bearing, gaskets, bolts, rebuilt S/C and new drive shaft and alignment tools All...

Could someone please tell me what is this threaded hole just above the starter motor in a seadoo 4-Tec motor is it just a spare hole to bolt another earth strap or does it have something else bolted to it, I have looked through the manual GTX 260 IS LTD 2015 but I cannot find what it is for. If...

Will a Venturi from a 2009 seadoo wake pro 215 fit onto a seadoo GTX 260 IS LTD 2015 The jet pumps look the same and the photo in the service manual look the same but they have a different part number Thanks

I have another problem with re-building my seadoo 260hp supercharge. The turbine impeller does not fit into the S/C housing, I don’t know if I have the correct turbine impeller. Before I go into the details, I feel I should give you some back ground of where I got this supercharger from. I...

I have another problem with re-building my seadoo 260hp supercharge. The turbine impeller does not fit into the S/C housing, I don’t know if I have the correct turbine impeller. Before I go into the details, I feel I should give you some back ground of where I got this supercharger from. I...

I used a socket to hammer the in the seal and it is now the same as yours so that's for the pics All working good now One more question which way do the 2 x flat spots on the splined lock washer go towards the gear or away from the gear. The SBT instruction don't say. I watched the SBT...

Thanks for the pics I will try and push mine in further

what size motor are you running

thanks pics will be great

OIL Which is the best oil to use a good quality 10W - 40 blend or full synthetic oil. There seems to be a lot of debate about, if you can use a full synthetic oil or not Amsoil put out a paper saying that it had tested it 10W - 40 full synthetic oil on seadoo jet ski and claim their oil is...

This is very strange, I knocked the shaft out about 30mm (Aussie Measurements HaHa) and took the step collar out and the shaft turn very easy and free I knocked the shaft back into the housing luckily the back bearing did not come all the way out of the housing so it went back into the house...

what should I do to fix it so that the step collar is not turning could it be that the step collar is the wrong size although it came out of the same kit

Hi Having problems with supercharge rebuild (2015 GTX 260hp) I have followed all the instruction but the new shaft feels very tight to spin it by hand I have got up to step 13 on SBT instruction, I have put the new bearing in the housing then put the bearing on the shaft Put the thrush...