Search results

Sold our 2012 210 SE yesterday. Sad to see her go, but I believe she's in good hands. She hit a solid 55mph on the sea trial. Still strong with 254 hours on her. I'll still be lurking in here though. On to the next boat...................................

So I had the issue with slightly burnt wires going into the regulator/rectifier. I replaced them with new connectors. Prior to swapping them out I was getting about 14.8v to the battery and also to the 12V plug on the dash. I used a small USB charger that has a voltage readout in the dash to...

My buddy came by yesterday to reset my maintenance light with his Candoo Pro. He recently replaced his motor due to a bearing failure. WHile discussing he mentioned his rectifier wires were badly burned and that he had to replace the entire unit. While we were chatting I began checking out my...

We last used our boat 2 weeks ago. Everything was fine as usual. It had been raining every day since then and I wanted to air the boat out today considering it was nice out for a bit. I also wanted to check to see if my GPS light was coming on as I saw a post about it and couldn't remember if...

Wifey and I were out yesterday. The ramp had some tall grass due to lack of use and when we launched we noticed the boat felt different. Drive out for about a minute and the starboard motor high exhaust temp alarm goes off. Shut down the motor and jump overboard to clear the pumps. Very little...

If this post in unacceptable for this site, please remove. Jetboatpilot is having their 30% discount on SeaDek kits through a group buy on jetboaters.net for those that are interested. Deadline is September 30th.

So our boat is 6 years old a buddy of ours with a 2012 Speedster just had his carbon ring fail this past weekend. Ours leak a little at the moment, so I wanted to replace them (we have twin motors) sooner rather than later. Then I began looking into the kits. I always prefer to go OEM as much...

So we haven't had our boat out since June 7th (very rare, but there were extenuating circumstances). When we opened her up today, we noticed quite a bit of moisture inside the boat and also some mildew. We use the factory mooring cover with some skirts we added to protect the black gelcoat. The...

Gonna replace the wear rings in our 2012 210 SE after the holidays. Found these and was wondering if there's any reason NOT to buy them. Appreciate the feedback. 210 SE Wear Ring

So I took the boat out for the first time since I flushed the cooling system and installed the rebuilt superchargers. Boat ran like a beast. I really need to check the speedo against a separate GPS unit as my GPS controlled speedo showed a top speed of 60 mph. Best I could muster prior to the...

I've always wanted to add an underwater light to our boat. I've been looking at a few different brands for a while now and I finally pulled the trigger on this in blue: Should be here mid week. I just installed my rebuilt SC'ers and am on hold until the new clamps get here end of next...

So I just shipped out our superchargers for rebuild and I have a question. What size hose clamps are required on the SC'er outlet/inlet hoses? Are they 3"? Ours had the original, single use clamps on the hoses, so we obviously need to replace with new. I was thinking of a banded T...

So I decided to flush my cooling system and replace the coolant being that the manual states this should be done every 2 years and our boat is 4 years old with no idea if the coolant is original or not. Stated with the starboard side motor first (good thing) and everything went perfect...

So I decided to change the oil & plugs today and either I'm burnt from Turkey intake overload or I have twin 215 supercharged motors when I was told they were twin 155's last year when we purchased her. Is this not the supercharger and inter-cooler plumbing? I wouldn't have any of this if she...

So I got in on a group buy for some Seadek for our 210SE. The kit came, but there were some issues with the old factory carpet snap holes not being covered. Quick phone call and it turns out pattern was pulled from an "S" model and not an "SE" with the difference being the factory carpet...

I just purchased an aluminum replacement lock nut for the reverse bucket cable, but while I was looking at what's currently there, I noticed my steering cable has been "modified" where it punches through the pump mount. I'm hoping whats under the blob of sealant isn't damaged. Before I dig into...

So our 2012 210 has always had a considerable amount of water come out of the drain plug after we are out on the boat for a while. This weekend I checked a bunch of things and think I've found the source of some of the leaks. I noticed water coming in from where the reverse bucket cable comes...

Several of the rubber bumpers under the hatches of our 210 are either missing or severely damaged (around 10 of them). The factory ones are roughly $7 ea., but once you add shipping, they become a bit unreasonable. I've been to my local Ace and other hardware stores and have yet to find an...

Looks like we are going to add Seadek to our boat, so we'll no longer be in need of the factory carpet. I figured we'd offer it up here for sale if anyone needed a replacement or if anyone wanted to add carpet to their 210. Carpet is in great condition and is light beige. I'll also save the...

My buddy was out on his 2003 GTX SC last weekend. He was running around in some slight chop when the ski just died. He noticed he had a loose positive cable on the battery. WHen he reconnected it he had no power when he plugged in the DESS key. No beeps, no display, nothing. He had to get towed...