Search results

I wish I could agree with the 2008 choice but Nay Nay. Our supercharger went out at 20 hours (1 month after warranty). I have it from a good source that the superchargers should be rebuilt every 100 hours or 2 years to stay ahead of problems. It only takes 3 bolts and a couple of hose clamps...

It is a Riva Stage 1 setup which sets lower in the hull than a stock intake.

I recently got a 04 RXP with the stage 1 installed. The intake being low in the hull and in front of the motor seems to suck in water when I bury the nose thus bogging me down for about a 1/4 mile before it clears. I thought of extending the intake up higher but before I do that and ideas to...

PFHC _ AG/HC - Polarizer with antiglare, hardcoat and adhesive

Ya-- I screwed up on this posting. I don't know what I was thinking. I didn't use Photo Bucket and was limited to the 5 photos. I can't remember how to merge these files and attach a sticky. I have to leave for a couple of weeks on a boat run so if its not done buy an Admin I'll repost it in...

Repair burned GSX Info Center part 3 12. Appling the lens retainer ring we cut - Apply a bead of Silicon RTV on the inside portion of the retainer ring and place it on the gauge. Tighten it with a hose clamp till dry. 13. After it dries the IC gauge is ready to go back in the boat...

Repair burned GSX Info Center part 2 7. Removing the old film from the LCD screen - Use a razor blade to get it started and peel off as much as you can. The blade didn't scratch the LCD screen and I used lacquer thinner to clean the old adhesive off the LCD screen. Before: After: 8...

Got down and fixed my burned info center gauge and figured to show how I did it. Repair Sea doo 96 GSX Info Center (IC) with a burned LCD polarized film All LCD screens have a polarizing film on top of the screen. In laymen's terms it darkens the image giving it clarity. One place to...

I was wrong My info guage on the 96' GSX just had the polarize film burned. I searched this forum but could not find the post on repairing the guage. What I need is a place to get the polarize film. Can anyone help. Thanks Mike

Same knocking problem With our '96 Gti it sounds like the same idle knock problem we've been experiencing since last year. At an idle it sounds like something is vibrating badly and resonating through the hull. We are original owners and can't seem to bear down on where it is coming from. It...

I believe when a info center looks browned and wrinkled its done. I have a 96 GSX with a browned out info center and was courious to see if it can be repaired. I took it apart down to the circuit board and the LCD screen was toast. Time to replace the whole guage. Or convert the guage hole...

JPX... This was not only a good post but a great post. It sure took the butterflys out of the old tummy when I was confronted with the classic bogging problem on my 96 GSX. On out last river run I could not get above 30mph and when I switched the fuel to reserve it died. sounds like a case...