Search results

Matt, would different locations for the jets have an impact. Seems some put both jets in the T fitting while some put a jet in the fitting on the waterbox and one in the fitting on the pipe? Would that make any difference?

Yep, stock carbs just jetted for flame arrestors. The seadoo racing manual says start with 200 in the waterbox and 150 in the fitting on the pipe. Also, stock pipe, but milled head. Matt, what do you mean 150 in the pipe unless using a fitting? Overall I am confused because when we did...

What size jets has everyone found to be ideal for a 787 X4 with high compression (pump gas) and jetted carbs with F/As?

I just wanted to update this post for anyone that comes across it with the same issue. I tested all the electronics as outlined in the manual and everything passed from what I could tell. So from there I just decided to de-pin every single connector in the wiring harness. I cleaned every...

This is awesome! Thank you sir. I'll run through it when next week when I am back at the lake

Thanks for the reply. I have thought about the DESS post as well and well check that out. What about the battery light? Could be 2 separate issues but something tells me the 2 are linked.

Hey all, have a bit of electrical issue I am trying to figure out where to start with. Symptom started out as just the battery light on the info gauge would come, but not constant, it was erratic. May be on one day but not the other or may be on during just certain throttle inputs (full...

Fast forward 2 years and I think I found what this crap is. I installed a Dan Squires repaired sending unit yesterday. The one in the ski was the original from 95 as I never replaced it when I did the resto. I pulled the old one apart once got it out and I found this. Looks like the floats...

Hey, leave Suke out of this :)

My guesses.... 1. There usually isn't enough demand at one time to get enough pre-orders, so then..... 2. Nobody wants to cough up the cash up front to do a full run and then have to sit on them...but 3. A group should get together and split that cost, but nobody wants to do that either. 4...

I also had a machine shop reverse engineer everything and was ready to start production for under $500 and nobody was interested. Apparently, people would rather pay the same price for a beat up used one. It's one of the great mysteries and will be part of X4 lore for centuries to come.

He has had a hard on for my ski for years :)

Here is how she sits 5 years later.

Yikes, I really need to take the time to reload all the pictures of this build that got smoked when photo-shack went tits up.

Obviously way more, but there a lot more advantages of the ACE. Powerband, reliability, torque, ease to tune, power, etc etc. The motor itself wouldn't be that expensive and if you can fab up your own turbo you are in business. A turbo ACE could make 160hp without breaking a sweat. And cool...

All of you are wrong. Turbo 900 ACE (from the Spark) in an X4 hull. You wanna talk about stupid fast.

Updating this for anybody else that comes across this post with the same issue. I finally got the cable out and should have done it this way from the start. From the pump side, use a dremel tool to cut down the 2 plastic half moons held on by the metal collar. Once those are cut away just use...

Thanks for the suggestion guys, we will give it a go. I just hope a new steering cable fixes this UMI issue.

Suke and I have been trying to get this thing out for 2 days (95 XP800) Someone please tell me how to get this thing out!

Suke and I are installing UMI on my 95 XP800. Absolutely can not get the steering cable bolted to the UMI bracket. Got th 2 half moons around the steering cable fitting but can't get the steering cable situated in a position to line up the half moon piece with the 2 holes in the UMI bracket. I...