Search results

Grommet? I did try the harder approach on one and broke it--I'll add it to my parts order. I didn't see any sign of a grommet. Maybe they came out with and are attached to the check valves now. I took a closer look at the check valves and that is the case. The grommet and check valve came...

Pic of parts I have tried lubricating with oil and also silicone lube. I could try grease as well. timmyboy76, you are right on the parts--#26 & 39. These protrude through a hole in the hull. I've also attached a snapshot from the parts fiche.

I'm replacing fuel lines on my 97 GTI. I decided to replace the vent lines also. When I tried to pull the hose off the two check valve/vents, they came out of the hull. Now I'm trying to get the check valve/vents back in the hull. Any ideas on how to do this. I've put them in the freezer...

I recently did some cleaning on the inside of my Seadoo. It had lots of oily residue. The best thing I found was Simple Green or Greased Lightning. Spray on straight from bottle, wait a few minutes and rinse off, & repeat as needed. On the smoother surfaces you could almost spray on and rinse...

Mark, Not certain, but could be the battery vent hose that connects to the battery vent. You said it ended near where the battery goes. Also, the battery vent hose is smaller diameter than the other hoses. Hope this help. . . Dennis

What you are seeing as contacts on the float are probably the magnets themselves. The float is not attached, just "floats" inside the baffle/pickup tube. Dennis

I think I had a similar problem once: Seadoo quit for no reason and then on trying to start, just got a CLUNK. The CLUNK was starter gear engaging the flywheel, but not turning. Essentially the starter gets enough power to engage the starter gear with flywheel, but not enough power to turn it...

Hi, How do I know if the impeller, or wear ring, or both need replacing? I have a 95 GTX and checked the impeller/wear ring clearance. It might be within 0.040" on the leading edge of the impeller blades, but closer to 0.075 in the middle. Propulsion system seemed to be fine this year. I...