Search results

I need some help identifying which models these micro touches work with. Theres no year at the end of rave on the first one and the second one doesn't say which model it is.

I am working on my senior project at Worcester Polytechnic Institute. We are using a 1997 spx hull with a special power plant with specs as follows: Max rpm: 7500 70 hp 116 ftlbs torque Stock pump will be used. I was thinking of using a prop off a 1994 spx only because it would be easier to...

Can you swap a 717 and its electrical from a 1996 spx to a 1999 sportster? Theres no electrical so im curious is the harness and everything from an spx is long enough or can that all be swapped over

so I managed to break the fitting that goes to the pump for the coolant line on two different 140mm pumps. the threaded part of the fitting is still in the pump and i cant get it out. I coudnt find anything on how to fix it. I have a 140mm pump off a gsx that had a brass threaded fitting that...

I picked up an hx the other day. Cleaned out the carbs and rebuilt them with all new genuine mikuni parts. 58 psi in each for pop off and passed the pressure test. Everything was spot on and adjusted properly. It takes off fine and rips for about 2 seconds then bogs down and wont rev up anymore...

so i just finished up rebuilding a 951. went to break it in today and have had some problems. the first being after its first heat cycle, i pulled the plugs and they were grey and had deposits built up on the plug. only had a few tiny specs that were shiny. towards the end of the heat cycle it...

i am rebuilding a 951 and plan on running premix. I have a block off plate and im pulling the tank out. I don't need another debate on if to run the pump or not but I am wondering what to do with the hoses that go on these fittings. I can't remember if these are oil lines or not. they are on the...

Does anyone know what springs go in a 1996 spx? I'm guessing 80 or 95 gram spring but im not sure and I can't find it anywhere.

So i pulled the top end on a 2000 gti with the 717 motor and single carb. pto side was 135 and mag side was 80. The motor turned over fine before hand. The piston on the mag side definitely looks like it dry seized. The grey tempo lines were also still on it and I believe the motor was an sbt...

I have a 1997 gsx that I can't seem to figure out whats wrong. The previous owner didn't winterize it and one of the jugs was cracked so I put a new top end in it with new jugs. I put it away running fine at the end of the season last year. I try to start it and it just clicks. It kind of cranks...

New here to the forum but I have been working on seadoos for a few years. I recently picked up a 1995 gtx with a 657x. I have searched the forums but I couldn't find anything on this topic but here's the background to it: The guy before me bought it to make his project but didnt know what he was...